Step Guide for Turning Off Your Main Water Line When Dealing With a Burst Pipe

Step Guide for Turning Off Your Main Water Line When Dealing With a Burst Pipe

Blog Article

More Details

Do you find yourself in search of insight concerning Steps to Take When a Pipe Bursts?

You have to understand how to switch off your main water line if you suffer from a burst pipe. Do not wait for a plumbing emergency prior to figuring out how to get this done. Besides, other than emergency leaks, you will certainly need to switch off your main water shutoff for plumbing repairs or if you leave for a long trip. Figure out even more concerning it in this tiny guide.

Why Must You Shut the Main Line Off?

Familiarizing on your own with just how your mainline turns on as well as off can save you throughout an emergency. As an example, when a pipe all of a sudden bursts in your house, you'll be besieged with panic. Therefore, you can easily shut the valve off and stop a lot more damages if you understand what to do. Furthermore, closing this off guarantees you don't have to deal with an abrupt flood in your home.
In addition to that, closing and also opening up the valves every so often guarantees they do not get stuck. It is likewise the best time for you to examine for rust or various other damaged connections. In addition, make it an indicate enlighten various other relative on what to do. This makes routine upkeep as well as handling emergency situations a lot easier. You can possibly save yourself countless bucks in repairs.

Where is This Key Shutoff Situated?

The main water line supply can differ, so you may require to find time to identify where it is. However, when your house is getting drenched as a result of a burst pipeline, you do not have the deluxe of time throughout an emergency. Hence, you must get ready for this plumbing situation by learning where the shutoff is located.
This shutoff valve could look like a round valve (with a lever-type manage) or a gateway valve (with a circle faucet). Placement relies on the age of your home and the environment in your location. Examine the adhering to usual spots:

Interior of Home: In colder climates, the city supply pipes face your house. Examine common utility locations like your cellar, laundry room, or garage. A most likely area is near the water heater. In the basement, this shutoff will certainly go to your eye level. On the other primary floorings, you might require to bend down to locate it.

Outdoors on the Exterior Wall: The primary shutoff is outside the home in exotic environments where they do not experience winter season. It is often connected to an exterior wall. Check for it near an outside faucet.

Outdoors by the Street: If you can not find the shutoff anywhere else, it is time to inspect your road. It could be outdoors next to your water meter. Maybe listed below the access panel near the ground on your road. You might need a meter secret that's offered in equipment stores to remove the panel cover. You can discover two valves, one for city use as well as one for your home. Ensure you shut down the ideal one. And you will certainly understand that you did when none of the taps in your house release freshwater.

Must This Constantly Be Shut Off?

Apart from emergencies, repair services, or long vacations, you may not need to shut off the major shutoff. For example, if only one fixture has problems, you can shut off the branch valve in that area. By doing this, you can still utilize water in various other parts of your home. For finest results, call a trusted plumber for emergencies.

Water Pipe Burst: 6 Steps You Need to Take Now

Why Did My Water Pipe Burst?

There are many reasons why a water pipe fails. While each situation is different, there are a few common causes of water pipe bursts, from weather to external damage.

Let’s look at five culprits, and the steps to take to prevent issues.

Freezing Temperatures

If you live in a climate where temperatures drop below freezing, be aware of the heightened potential for pipe problems.

When temperatures drop, the water inside your pipes may turn to ice. As more water trickles in, the frozen area grows… and the frozen water expands.

Over time, the pressure may be too much. Bonds in the pipe weaken and cracks form. When the ice finally melts, the temperature change can shatter both the ice and the surrounding pipe. If the pressure is strong enough, the pipe bursts.

To keep pipes from freezing and bursting, shut off the water to outdoor spigots and drain the remaining water from pipes. Insulate indoor pipes to keep them warm.

If pipes are on an outer wall, open cabinets if possible. When it’s freezing outside, leave at least one faucet slowly dripping to keep the water moving inside the pipes at all times.

If the temperature gets well below freezing and even into the negatives, you may want to leave a steady stream of water flowing. A water bill that’s a little bit higher will likely be much cheaper than flooding repairs.

Rust and Corrosion

Corrosion is another common cause of burst pipes. Rust and corrosion build up inside pipes, especially in older homes and in areas where water has a high iron content.

Over time, the corrosion weakens pipes, leading to an increased chance of a burst. Steel pipes are especially susceptible to rust.

To prevent rust and corrosion, replace steel pipes with plastic or copper. These types of pipes tend to resist corrosion longer.

Tree Roots

When trees around your home grow taller, their roots grow downward and outward, too. Sometimes, roots come in contact with water pipes.

In a battle between tree roots and pipes, the roots usually win. As roots continue to grow and press against the pipes, the pipes crack, leading to leaks.

To keep roots from encroaching, be sure to plant trees far from your water pipes. Choose slow-growing tree varieties that have small root balls.

If trees are already encroaching, you may try to add a physical or chemical barrier to prevent roots from accessing pipes.

Movement and Water Pressure

Sometimes, the soil around pipes shifts or moves, causing pipes to lose stability and crack. Movement may occur due to nearby construction, temperature fluctuations, or repairs made to other parts of the plumbing system.

High water pressure may also cause pipes to move. If the pressure reaches a PSI above 60, pipes may simply burst from the strain.

Construction is a major cause of pipe movement. Request that dirt from nearby construction isn’t dumped on top of your pipe system to prevent movement and increase pressure.

Clogs

You already know that clogs can back up your sink and shower drains. But did you know that they can lead to burst pipes, too? A clog can cause water pressure to build up behind it, especially if it’s deep within the system.

That’s why it’s important to be mindful of what gets poured down the drain, goes into the garbage disposal, and flushed down the toilet. Limiting drains to water and approved materials can help prevent deep clogs.

Signs of a Busted Water Pipe

How do you know if you have a burst water pipe? The most obvious sign is finding puddles of water in your home.

However, puddles can come from leaks, rather than bursts. Here’s how to tell the difference.

If a puddle gets bigger when you turn the water on, that indicates a burst pipe. Because bursts allow water to move through the walls, you may notice water puddling directly under the burst pipe, and also pooling in other places.

For instance, if the pipe leading to the bathroom sink bursts, you may see puddles under the sink and on the floor near the tub and toilet. In contrast, leaks tend to pool in just one place.

Another sign of a burst pipe? Water pressure issues. Burst pipes generally lead to low water pressure, as the cracked area affects how much water moves through the pipes.

Stains may appear on the walls and floors near a busted water pipe. If bursts are caused by rust, you may notice that water has a strange, metallic odor and reddish discoloration. The presence of mold or mildew may also indicate a burst water pipe.

First Steps to Take When a Water Pipe Bursts

Locate your main water valve and shut it down to prevent any more water from flowing into your walls and home. Your main shut-off may be in your basement, crawl space, or by your hot water heater. (If you think water has come in contact with electrical sockets, wiring, or a fuse box, turn your electricity off, too).

Drain your faucets. Starting with the cold tap, drain the remaining water out of the pipes, then flush every toilet in the house a few times. Next, turn off your boiler or water heater and drain the hot tap. This will relieve water pressure.

Call the plumber once the water is turned off and pressure is relieved. Getting professional help quickly is key.

Try to find the burst pipe. If you can find the leak, place a bucket under it to catch the water. Look for bulges in the ceiling or other signs of water damage.

Document the damage. You may need to make an insurance claim, so document thoroughly. Take close-up photos of damaged items and areas, and of the pipes themselves. Use rulers in pictures to show water levels. Take photos from different angles; the more documentation you have, the better. You may even want to take a video of the leak before you shut off the water main.

Clean up the mess. If water sits too long, microbes will grow, leading to harmful mold and mildew. This can lead to long-term damage, so get your home dry as soon as possible. You may need to call in a professional drying company, as simply opening the windows and turning on fans may not be enough.

https://www.homego.com/blog/water-pipe-burst/

Do you enjoy reading up on Steps to Take When a Pipe Bursts? Post a short review below. We would be pleased to listen to your opinions about this post. We are looking forward that you visit us again in the near future. For those who enjoyed reading our page if you please make sure you remember to pass it around. I appreciate reading our article about Steps to Take When a Pipe Bursts.

Dial, rest easy!

Report this page